The application field of Bearings
Jan 18, 2022
Bearings are an indispensable part of precision machinery and precision machine tools. In recent years, due to the increasing number of machine tool companies made in China, the demand for bearings is also increasing. Then, what fields can bearings be used in? and on the device?
The first application is the machine tool manufacturer. At present, most of the bearings are mainly used in high-precision machine tools, grinders, etc. In the emerging robot industry, the prospects of the robot industry are very good now. More and more companies are beginning to recognize and use robots to replace labor. This kind of high-tech industry is naturally inseparable from these components such as bearings.
There are also many advantages of bearings, It can be roughly summed up in the following points:
1. Bearings can be easily assembled in all directions of the main shaft, and mass production can be realized through standardization and serialization, and the assembly and use are more convenient.
2. The bearing can bear radial and axial loads at the same time, so the bearing can be much simpler than the bearing structure of multiple sets of combinations.
3. Due to the high rotational efficiency and low heat dissipation of the bearing, the consumption of lubricating oil is small.
4. The radial and axial dimensions of the bearing can be limited, so the space can be saved, and it can be used in high-precision and high-rigidity occasions with small space requirements.
Luoyang Huigong Bearing Technology Co., Ltd. mainly produces and sells thin-walled bearings, rolling mill bearings and large roller products. Bearing types can be used in all walks of life, including various machine tools, small to robot joints, cameras, medical equipment, etc. You are welcome to consult at any time
Share:
related news
-
CHG Bearing：Bearings for wind turbinesApr 16, 2024Blade bearings are used to connect blades with hubs in MW wind turbines, and they also can adjust the windward direction of blades to ensure electricity production with power rating and the safe work of wind turbines. Usually, single or double rows four-point contact ball slewing bearings are used as blade bearings, which have preload, special designed seals, anticorrosion surfaces,etc.
-
CHG Bearing:The lifespan of bearingsMar 28, 2024The bearing life refers to the number of revolutions or hours experienced by the bearing before the occurrence of pitting under a certain load. The life of rolling bearings is usually defined by the number of revolutions or the number of hours worked at a certain speed. During this lifespan, no initial fatigue damage (such as spalling or defects) should occur on any bearing ring or rolling element.
-
Assembly and disassembly of tapered roller bearingsMar 21, 2024Tapered roller bearings can be mounted directly on a tapered shaft or on a cylindrical shaft through an adapter sleeve or withdrawal sleeve. A tight fit is obtained by axially moving the inner ring. The tight fit of the inner ring can be effectively controlled by measuring the reduction in radial clearance caused by the expansion of the inner ring.
-
Four row tapered roller bearingsMar 14, 2024It usually consists of two double-row inner rings, a double-row outer ring and two single outer rings. There is an inner spacer ring between the two inner rings, and there are two middle spacer rings between the three outer rings. Such a design The bearing can adjust the clearance to adapt to different working conditions.
